All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
 
All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
190 Boundary Rd, Marlboro, NJ 07746 732-222-3553
asset recovery, rigging team with sling and interior demolition

Selective Demolition and Rigging at Process Plant

Selective Demolition and Rigging at Process Plant

R. Baker & Son recently performed selective demolition and equipment rigging for a process plant construction project. The selective demolition was necessary to prepare the existing facility to receive all of the new mechanical process equipment, including three 5,000 HP boilers with a deaerator, two large compressors, two chillers, boilers with associated economizers, several prefabricated platforms, and two large vertical grinders with elevators and conveyors.

Because the existing access points and doorways were not large enough to accommodate the entry of the equipment, the careful removal of block walls and the installation of steel beams and lintels would be required to allow proper access into the building.

A main challenge during the rigging phase was coordinating bringing the equipment into the building within a tight timeframe according to schedule. Some of the equipment, such as the vertical grinders and conveyors, required assembly in an adjacent outdoor area and had to be brought in vertically due to limited rigging headroom inside the building.

To achieve this, the Baker Team enlarged an existing block opening to 30 ft. wide by 24 ft. high and reinforced it with a pre-engineered support steel beam. The opening was to remain in use as the main loading dock access point. We also created two permanent openings in an interior dividing wall, each measuring 16 ft. wide by 14 ft. high, that would be utilized for forklift traffic and to facilitate the movement of materials throughout the facility. The openings were finished with concrete and prime-painted for future finishing use.

An 80-ton crane with an extended jib, two articulating boom lifts, and a large Lull were used to lift and move the mechanical and process equipment through the opening and into the building. All the equipment was moved in safely and set in place within the allotted timeframe to the client’s full satisfaction.

Full News Archive

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

Recent News

Rigging equipment ready for a heavy lift, NYC, NJ
Industrial Rigging NYC & NJ: Choosing Your Urban Partner

New York City and New Jersey's iconic skylines? They're pure proof of incredible construction and engineering. But peel back the layers of every towering building and complex industrial spot,...
Heavy equipment rigging during the installation of a new grain silo and processing system by R Baker.
Grain Silo & Equip. Installation: R Baker

R. Baker recently completed a challenging and uniquegrain processing installation, involving theheavy equipment riggingandindustrial equipment installationof four 70-foot processgrain silos, an...
Specialized healthcare demolition ensuring sterile environments with ICRA compliance.
Healthcare Demolition: ICRA Protocol & Clean Environments

Healthcare facilities present some of the most challenging environments for interior and selective demolition projects, where maintaining a sterile, contamination-free environment is absolutely...
lean construction meeting for Rigging NYC, NJ
Lean Construction: Optimize Demolition, Rigging & Dismantling Projects

Many R. Baker clients have adopted and use the lean construction process on their projects, the list includes most pharmaceutical companies, energy companies, manufacturing of all kinds along with...
Secure storage of industrial boiler for rigging and assembly projects in New York and New Jersey.
Rigging Services for NYC and NJ: Offsite Storage & Asset Management

For rigging projects in New York City and New Jersey, access to secure offsite storage and asset management is a crucial component of rigging, setting, and assembly operations,helping accommodate...
Safe rigging procedures and equipment inspection - R. Baker & Son
Rigging: A Complete Guide to Safety, Equipment, and OSHA Standards

Rigging is one of the most critical operations in heavy industry, and at R. Baker & Son, we specialize in safe, compliant lifting with the right equipment, planning, and OSHA-certified practices....
Workers in PPE during National Construction Safety Stand Down
Construction Safety Stand Down: History and Purpose

The Construction Safety Stand Down is an annual event aimed at raising awareness about safety in the construction industry, particularly focusing on fall protection. This initiative serves as a...
R. Baker & Son performing safe, sustainable rigging and demolition in NYC and NJ, with turnkey and MWBE-certified services
The Future of Rigging & Demolition in NY & NJ

The Evolving Landscape of Heavy Industrial Services in NYC & NJ R. Baker & Son stands as a cornerstone in the industrial services sector, with a profound legacy rooted in decades of...